Skip to content

PROC-X MANUFACTURING GROUP

Material precision. Built into the process.

Process solutions for advanced battery materials, from powder to performance.

Applications for Energy & Battery Materials.

Graphite & carbon materials

Graphite & carbon materials

Discuss milling, classification and handling against particle and purity targets.

Electrode formulations

Electrode formulations

Dry mixing and liquid dispersion for active materials, additives and binders.

Recycled material preparation

Recycled material preparation

Evaluate variable feedstocks, contamination and the agreed processing boundary.

Engineered for what matters most.

◉

Particle size

Specify distribution and measurement method.

◇

Contamination control

Identify acceptable impurity limits.

≋

Contained handling

Review material-specific handling requirements.

▥

Consistent blends

Address dosing and segregation.

Seven specialists. One coordinated team.

AIS

Ingredient handling

Ingredient handling

DP

Milling powders

Particle size reduction

QuantumX

Mixing ingredients

Mixing & blending

EmulXion

Liquid processing

Emulsification & homogenization

Fuxion

Extrusion compounds

Extrusion & compounding

Product inspection

Product inspection

PreciXion

Packaging

Filling & packaging

Knowledge for your application.

Battery & Energy Materials Brochure

FEATURED RESOURCE

Battery & Energy Materials Brochure

Explore the process considerations behind your material, formulation and production requirements.

Battery Material Processing: Milling, Feeding & Mixing

Connect material preparation to formulation

Battery-material projects can involve powder preparation, controlled feeding, dry blending or liquid dispersion. The required process depends on chemistry and the next manufacturing operation. Describe incoming material, target particle distribution, solids concentration and acceptable contamination so the equipment discussion remains tied to the material specification.

Graphite and specialty powder processing

Feed variability, abrasiveness and the required fine-particle content influence milling and classification choices. DP Pulverizers technologies can be evaluated alongside AIS handling and feeding. Consider moisture pickup, transfer arrangements and collection requirements as part of the system rather than treating the mill as an isolated machine.

Electrode materials and liquid formulations

Dispersing solids into a liquid can involve powder wetting, agglomerate control and viscosity development. Mixing order, binder behavior and solids loading affect the process. QuantumX and EmulXion technologies can be considered according to the formulation, while Fuxion may be relevant where an extrusion or compounding route is being evaluated. Material testing is needed to establish application-specific results.

Recovered materials and variable feedstocks

Recovered materials may differ from virgin feed in composition, moisture and particle form. Specify the processing boundary and the variability that equipment must accommodate. Discuss sampling, contamination control and wear before defining a configuration. A material-preparation proposal should not be confused with a guarantee of downstream cell performance or a complete recycling process.

Questions about your process.

What particle-size information is useful for a milling inquiry?

Provide the incoming distribution, target distribution, measurement method and throughput. Include limits on fines or oversize where relevant; a single average size may not adequately define the requirement.

Can dry blending and slurry preparation use the same equipment?

They involve different flow behavior and process demands. Selection should reflect the actual recipe, solids content and desired result rather than assume that a powder blender is suitable for a viscous slurry.

Tell us what you want to make.

Share your application, production goals and current challenge.